Making IR Lamp Holders That Actually Fit Your Press
When people talk about “universal” lamp holders, they usually mean something that almost fits. But in a print shop, “almost” is how you end up wasting a whole afternoon fighting with a bracket. We don’t do “almost.” We build these holders to match the exact footprint and electrical guts of the big OEM brands. If it’s supposed to slide in, it slides in. Dealing with the Heat and the Power Printing presses need a ton of heat, and they need it fast. That puts a lot of pressure on the hardware. We build our holders to handle the heavy amperage of shortwave IR tubes so you don’t have to worry about your contact points melting into a puddle. If you’re running 230V or 400V, the tension in that holder has to be just right. Too loose? You’ll see arcing. Too tight? You’ll hear that dreaded crack of quartz glass as you try to install the tube. We’ve dialed in that balance. No Drilling, No Headaches We spend most of our time obsessing over the interface. Whether you’re using R7s or SK15 connectors, our holders are designed to be drop-in replacements. The distance between the mounting brackets matches your chassis exactly. Plus, we use ceramics and alloys that won’t warp or bend when things get scorching hot. You can just swap them out. No drilling new holes, no modifying your frame, and no “making it work” with a hammer. One Big Catch: The Airflow Here’s the thing: high-wattage lamps are brutal on insulation. Our hardware can take the heat, but your wiring needs to be up to the task. And please, check your ventilation. If your airflow is blocked, a high-density lamp will cook the holder from the inside out. It’s simple: we provide the heavy-duty hardware, but you’ve got to keep the air moving to keep those terminals from overheating during a long run.